| Author |
Message |
|
|
 |
Post subject: issue with kernel 2.6.24 and dvd-k3b with new distro as well
 Posted: Mar 02, 2008 - 02:13 PM
|
|
Joined: Nov 05, 2007
Posts: 12
Status: Offline
|
|
Hello all,
encountered a small prob with the new 2.6.24 kernel. also used the newest one via smxi.
It seems the the dvd-device is not properly used.
k3b claims that there is no burner (after trying a long time showing only its logo)
content from dmesg
-------
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata3.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 8 in
cdb ac 00 00 00 00 00 00 00 00 01 03 00 00 00 00 00
res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata3: soft resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: qc timeout (cmd 0xa1)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
ata3.00: revalidation failed (errno=-5)
ata3: failed to recover some devices, retrying in 5 secs
ata3: hard resetting link
ata3: port is slow to respond, please be patient (Status 0x80)
ata3: COMRESET failed (errno=-16)
ata3: hard resetting link
ata3: port is slow to respond, please be patient (Status 0x80)
ata3: COMRESET failed (errno=-16)
ata3: hard resetting link
ata3: port is slow to respond, please be patient (Status 0x80)
ata3: COMRESET failed (errno=-16)
ata3: limiting SATA link speed to 1.5 Gbps
ata3: hard resetting link
ata3: COMRESET failed (errno=-16)
ata3: reset failed, giving up
ata3.00: disabled
ata3: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xa frozen t4
ata3: SError: { PHYRdyChg CommWake DevExch }
ata3: hard resetting link
ata3: port is slow to respond, please be patient (Status 0x80)
ata3: COMRESET failed (errno=-16)
ata3: hard resetting link
ata3: port is slow to respond, please be patient (Status 0x80)
ata3: COMRESET failed (errno=-16)
ata3: hard resetting link
ata3: port is slow to respond, please be patient (Status 0x80)
ata3: COMRESET failed (errno=-16)
ata3: limiting SATA link speed to 1.5 Gbps
ata3: hard resetting link
ata3: COMRESET failed (errno=-16)
ata3: reset failed, giving up
sr 2:0:0:0: rejecting I/O to offline device
ata3: EH complete
ata3.00: detaching (SCSI 2:0:0:0)
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
scsi 2:0:0:0: rejecting I/O to dead device
----------------------------------
the same appears with the newest distro preview.
Using the 2.6.23.15 kernel worked without a problem after.
"to get the device back requires a cold-start btw."
Thanks for any hints and help in advance.
hb
hb@pluto:~$ infobash -v 3
Host/Kernel/OS "pluto" running Linux 2.6.24-2.6.24.3.slh.1-sidux-amd64 x86_64 [ sidux 2008-01 - Νυξ preview 1 - kde-lite - (200803010135) ]
CPU Info (1) Intel Core2 6600 @ 4096 KB cache flags( sse3 nx lm vmx ) clocked at [ 1600.000 MHz ]
(2) Intel Core2 6600 @ 4096 KB cache flags( sse3 nx lm vmx ) clocked at [ 1600.000 MHz ]
Videocard nVidia G71 [GeForce 7950 GT] X.Org 1.4.0.90 [ 1280x1024@60.0hz ]
Network cards Marvell 88E8056 PCI-E Gigabit Ethernet Controller, at port: 8000
Realtek RTL-8139/8139C/8139C+, at port: b000
RaLink RT2561/RT61 rev B 802.11g
Processes 107 | Uptime 12min | Memory 177.6/3962.6MB | HDD ATA SAMSUNG HD321KJ,ATA SAMSUNG HD321KJ,ATA SAMSUNG HD403LJ,ATA SAMSUNG HD321KJ Size 1360GB (1%used) | Client Shell | Infobash v3.01
hb@pluto:~$
It works fine (detects burner when filled with media)
if empty (that was my first post)
it generates
hb@pluto:~$ k3b
hb@pluto:~$ (K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_CD/DVDW_SH_S183A to device /dev/scd0
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 2, id: 0, lun: 0
(K3bDevice::Device) /dev/scd0: init()
(K3bDevice::Device) /dev/scd0 feature: CD Mastering
(K3bDevice::Device) /dev/scd0 feature: CD Track At Once
(K3bDevice::Device) /dev/scd0 feature: DVD Read (MMC5)
(K3bDevice::Device) /dev/scd0 feature: DVD+R
(K3bDevice::Device) /dev/scd0 feature: DVD+RW
(K3bDevice::Device) /dev/scd0 feature: DVD+R Double Layer
(K3bDevice::Device) /dev/scd0 feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/scd0 feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/scd0 feature: Layer Jump Recording
(K3bDevice::Device) /dev/scd0 unknown profile: 2
(K3bDevice::Device) /dev/scd0: dataLen: 60
(K3bDevice::Device) /dev/scd0: checking for TAO
(K3bDevice::Device) /dev/scd0: checking for SAO
(K3bDevice::Device) /dev/scd0: checking for SAO_R96P
(K3bDevice::Device) /dev/scd0: checking for SAO_R96R
(K3bDevice::Device) /dev/scd0: checking for RAW_R16
(K3bDevice::Device) /dev/scd0: checking for RAW_R96P
(K3bDevice::Device) /dev/scd0: checking for RAW_R96R
(K3bDevice::ScsiCommand) failed:
command: GET PERFORMANCE (ac)
errorcode: 72
sense key: NO SENSE (2)
asc: 0
ascq: 3
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE length det failed.
(K3bDevice::ScsiCommand) failed:
command: MODE SENSE (5a)
errorcode: 0
sense key: NO SENSE (2)
asc: 0
ascq: 0
(K3bDevice::Device) /dev/scd0: MODE SENSE length det failed.
(K3bDevice::ScsiCommand) failed:
command: MODE SENSE (5a)
errorcode: 0
sense key: NO SENSE (2)
asc: 0
ascq: 0
(K3bDevice::Device) /dev/scd0: MODE SENSE with real length 65535 failed.
(K3bDevice::Device) could not open device /dev/scd0 for reading
(Datei oder Verzeichnis nicht gefunden)
Error while retrieving capabilities.
Could not initialize device /dev/scd0
Could not resolve /dev/scd0
/dev/scd0 resolved to /dev/scd0
(K3bDevice::Device) could not open device /dev/scd0 for reading
(Datei oder Verzeichnis nicht gefunden)
could not open device /dev/scd0 (Datei oder Verzeichnis nicht gefunden)
Devices:
------------------------------
removing udi /org/freedesktop/Hal/devices/pci_8086_2822_scsi_host_0_scsi_device_lun0_scsi_generic
removing udi /org/freedesktop/Hal/devices/storage_model_CD/DVDW_SH_S183A
Unmapping udi /org/freedesktop/Hal/devices/storage_model_CD/DVDW_SH_S183A from device /dev/scd0
removing udi /org/freedesktop/Hal/devices/pci_8086_2822_scsi_host_0_scsi_device_lun0
removing udi /org/freedesktop/Hal/devices/pci_8086_2822_scsi_host_0
and
dmesg error codes as above
and the slider is blocked.
Available only after power off power on cycle.
running on
hb@pluto:~$ infobash -v
Host/Kernel/OS "pluto" running Linux 2.6.24-2.6.24.3.slh.1-sidux-amd64 x86_64 [ sidux 2008-01 - Νυξ preview 1 - kde-lite - (200803010135) ]
CPU Info (1) Intel Core2 6600 @ clocked at [ 1600.000 MHz ]
(2) Intel Core2 6600 @ clocked at [ 1600.000 MHz ]
Videocard nVidia G71 [GeForce 7950 GT] X.Org 1.4.0.90 [ 1280x1024@60.0hz ]
Processes 101 | Uptime 10min | Memory 141.4/3962.6MB | HDD Size 1360GB (1%used) | Client Shell | Infobash v3.01
hb@pluto:~$ |
|
|
| |
|
|
|
 |
|
|
|
Post subject:
Posted: Mar 02, 2008 - 07:18 PM
|
|
Joined: Jun 12, 2007
Posts: 22
Status: Offline
|
|
Hallo,
i have the same burner as you and get the same message.
As well under Kubuntu (Hardy).
I compilied k3b from the source (with and without HAL), but the error came anyway.
Code:
ndreas@andreas-desktop:~$ k3b
kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_CD/DVDW_SH_S183A to device /dev/scd0
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 5, id: 0, lun: 0
(K3bDevice::Device) /dev/scd0: init()
(K3bDevice::Device) /dev/scd0 feature: CD Mastering
(K3bDevice::Device) /dev/scd0 feature: CD Track At Once
(K3bDevice::Device) /dev/scd0 feature: DVD Read (MMC5)
(K3bDevice::Device) /dev/scd0 feature: DVD+R
(K3bDevice::Device) /dev/scd0 feature: DVD+RW
(K3bDevice::Device) /dev/scd0 feature: DVD+R Double Layer
(K3bDevice::Device) /dev/scd0 feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/scd0 feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/scd0 feature: Layer Jump Recording
(K3bDevice::Device) /dev/scd0 unknown profile: 2
(K3bDevice::Device) /dev/scd0: dataLen: 60
(K3bDevice::Device) /dev/scd0: checking for TAO
(K3bDevice::Device) /dev/scd0: checking for SAO
(K3bDevice::Device) /dev/scd0: checking for SAO_R96P
(K3bDevice::Device) /dev/scd0: checking for SAO_R96R
(K3bDevice::Device) /dev/scd0: checking for RAW_R16
(K3bDevice::Device) /dev/scd0: checking for RAW_R96P
(K3bDevice::Device) /dev/scd0: checking for RAW_R96R
(K3bDevice::ScsiCommand) failed:
command: GET PERFORMANCE (ac)
errorcode: 72
sense key: NO SENSE (2)
asc: 0
ascq: 3
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE length det failed.
(K3bDevice::ScsiCommand) failed:
command: MODE SENSE (5a)
errorcode: 0
sense key: NO SENSE (2)
asc: 0
ascq: 0
(K3bDevice::Device) /dev/scd0: MODE SENSE length det failed.
(K3bDevice::ScsiCommand) failed:
command: MODE SENSE (5a)
errorcode: 0
sense key: NO SENSE (2)
asc: 0
ascq: 0
(K3bDevice::Device) /dev/scd0: MODE SENSE with real length 65535 failed.
(K3bDevice::Device) could not open device /dev/scd0 for reading
(No such device or address)
Error while retrieving capabilities.
Could not initialize device /dev/scd0
Devices:
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
removing udi /org/freedesktop/Hal/devices/pci_8086_27c1_scsi_host_1_scsi_device_lun0_scsi_generic
removing udi /org/freedesktop/Hal/devices/pci_8086_27c1_scsi_host_1_scsi_device_lun0
removing udi /org/freedesktop/Hal/devices/pci_8086_27c1_scsi_host_1
removing udi /org/freedesktop/Hal/devices/storage_model_CD/DVDW_SH_S183A
Unmapping udi /org/freedesktop/Hal/devices/storage_model_CD/DVDW_SH_S183A from device /dev/scd0
andreas@andreas-desktop:~$ k3b: WARNING: Pixmap not found for mimetype application/pgp-keys
k3b: WARNING: Pixmap not found for mimetype application/pgp-keys
|
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 06, 2008 - 12:07 PM
|
|
Joined: Nov 05, 2007
Posts: 12
Status: Offline
|
|
Hello all,
any news on this topic ?
Best Regards
HB |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 06, 2008 - 12:18 PM
|
|
Team Member
Joined: Nov 24, 2006
Posts: 2531
Location: berlin
Status: Offline
|
|
what is the device called in fstab?
greetz
devil |
_________________
>>we are sidux - resistance is futile - you will be assimilated<<
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 06, 2008 - 07:28 PM
|
|
Joined: Jun 12, 2007
Posts: 22
Status: Offline
|
|
my fstab:
Code:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda2
UUID=fee3a108-9887-41b4-8822-540b0f4ccf70 / ext3 errors=remount-ro 0 1
# /dev/sdb1
UUID=6ea2d64a-4087-4077-a8e8-aca162dafd83 /home ext3 defaults 0 2
# /dev/sda1
UUID=d15d3744-4c36-4f43-9dfb-5b702047b6d1 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
|
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 07, 2008 - 10:19 AM
|
|
Joined: Nov 05, 2007
Posts: 12
Status: Offline
|
|
My fstab
# /etc/fstab - static information about the filesystems - fstab(5)
#
# /etc/fstab is only read by programs, and not written; it is the duty of the
# system administrator to properly maintain this file.
#
# Instead of giving the device explicitly, one may indicate the filesystem
# that is to be mounted by its UUID or VOLUME label. This will make the
# system more robust: adding or removing a disk changes the disk device name
# but not the filesystem UUID or VOLUME label.
#
# <filesystem> <mountpoint> <type> <options> <dump> <pass>
# automatically added, SAMSUNG_HD403LJ-S0NFJ1KPA03902-part3, /dev/sda3
UUID=9b32272f-f6a7-4b18-acfa-3c9a8da64f7d / ext3 defaults,noatime,errors=remount-ro 0 1
# automatically added, SAMSUNG_HD403LJ-S0NFJ1KPA03902-part1, /dev/sda1
UUID=5f104f81-f4b5-4b43-ae46-7fcf39d1d2cc /boot ext3 defaults,noatime0 2
# automatically added, SAMSUNG_HD403LJ-S0NFJ1KPA03902-part2, /dev/sda2
/dev/disk/by-uuid/D09C5BF49C5BD396 /media/disk1part2 ntfs auto,users,exec,ro,dmask=0022,fmask=0133,nls=utf8 0 0
# automatically added, SAMSUNG_HD403LJ-S0NFJ1KPA03902-part4, /dev/sda4
UUID=864fc5ce-b84e-4d4a-8bc3-a30045364163 none swap sw 0 0
# automatically added, SAMSUNG_HD321KJ-S0MQJ1KLC27913-part1, /dev/sdb1
#/dev/disk/by-uuid/0A80CC6480CC5839 /media/disk2part1 ntfs auto,users,exec,ro,dmask=0022,fmask=0133,nls=utf8 0 0
# automatically added, TSSTcorpCDDVDW_SH-S183A
/dev/scd0 /media/cdrom udf,iso9660 user,noauto 0 0
# automatically added
/dev/fd0 /media/fd0 auto rw,user,noauto 0 0
# temporary filesystem in virtual memory
#tmpfs /tmp tmpfs defaults 0 0 |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 07, 2008 - 06:54 PM
|
|
Joined: Nov 28, 2006
Posts: 3959
Status: Offline
|
|
| I saw k3b fail to handle a dvd unit when it did not have the specs in its database one time, finally an upgrade let it see it, what's the device actually? Is it brand new? |
_________________
sidux Maintenance script: dist-upgrade, kernel install, general utilities: smxi
Backup script [using rdiff-backup]: rd-h2.sh
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 07, 2008 - 07:45 PM
|
|
Joined: Jun 12, 2007
Posts: 22
Status: Offline
|
|
| the burner is about 1 year old. -> Samsung SH-S183A |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 08, 2008 - 10:14 AM
|
|
Joined: Nov 05, 2007
Posts: 12
Status: Offline
|
|
Hello,
just want to re-emphasiz it worked ok with the old kernel 2.6.23.
no issues.
Best Regards
HB |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 08, 2008 - 11:31 PM
|
|
Team Member
Joined: Nov 27, 2006
Posts: 1914
Location: underworld
Status: Offline
|
|
| Maybe try changing it to (in fstab)
Code:
# automatically added, LITE-ON_DVDRW_LH-20A1S
/dev/cdrom /media/cdrom udf,iso9660 user,noauto 0 0
|
_________________
sidux uses high compression technology > special care is needed when burning the iso > please burn in DAO-mode, DAO or DIE. NEVER EVER do a apt-get upgrade or use adept, synaptic or aptitude
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 09, 2008 - 11:32 AM
|
|
Joined: Jun 12, 2007
Posts: 22
Status: Offline
|
|
no changes. 
Code:
#/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/cdrom /media/cdrom udf,iso9660 user,noauto 0 0
K3B use HAL
Code:
andreas@andreas-desktop:~$ k3b
kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_CD/DVDW_SH_S183A to device /dev/scd0
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 3, id: 0, lun: 0
|
|
|
| |
|
|
|
|
|
|
|
Post subject: next steps ?
Posted: Mar 11, 2008 - 10:35 AM
|
|
Joined: Nov 05, 2007
Posts: 12
Status: Offline
|
|
Hello all,
I have just installed an old kernel 2.6.23.16 on the newest distro and the k3b / dvd problem dissappeared.
What is your proposal how to continue.
I've no clue where the problem lies.
Any ideas welcome.
TiA
HB |
|
|
| |
|
|
|
|
|
|
|
Post subject: RE: next steps ?
Posted: Mar 11, 2008 - 12:50 PM
|
|
Joined: Dec 21, 2006
Posts: 266
Location: Slough, England
Status: Offline
|
|
Have you checked your cables?
Tried latest 2.6.24.3.slh.2? |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 12, 2008 - 07:48 AM
|
|
Joined: Nov 05, 2007
Posts: 12
Status: Offline
|
|
Hello,
did not check cables so far; behaviour seems to be dependent on
kernel, since once performed the upgrade it came to this situation. Never had this before.
Regards HB |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Mar 12, 2008 - 08:52 AM
|
|
Joined: Dec 21, 2006
Posts: 266
Location: Slough, England
Status: Offline
|
|
|
|
|
|
|
|
