sidux.com
Menu

News

Give back
Last 3 Contributions
30-11-2008 20.00
25-11-2008 100.00
25-11-2008 20.00

Donate


Sponsor
hetzner.de

Languages
Preferred language:


FAQ  •  Search  •  Register  •  Log in to check your private messages
Log in  •   Sub-Forum  •   Maximize

.23 kernels break network/internet connection
1, 2  Next
sidux.com Forum Index » English Forum » sidux-Kernelhacking
Post new topic   Reply to topic
View previous topic Printable version Log in to check your private messages View next topic
Author Message
RazberrieTart
Post subject: .23 kernels break network/internet connection  PostPosted: Oct 12, 2007 - 09:22 PM



Joined: Mar 22, 2007
Posts: 436
Location: The Forest
Status: Offline
Ok. I installed the latest kernel in smxi, .23-slh-2 and completely lost network and internet connections. After trying a few things, netcardconfig is correct, nothing seemed to work.

Booting into the previous kernel I have, .22-9, have full working network/internet connections.

LadyCuddles also tried the same thing with the same results, the new kernel does not let us have network/internet connection.

Netcardconfig is correct, old kernels will boot, unplugging/replugging modem, rebooting, unplugging, replugging router, editing etc/network/interfaces, nothing gives connection. Also tried running ifconfig, running dhclient. Nothing.

x-un-i asked for the output from var/log/messages, dmesg, and lsmod.


var/log/messages

Code:
 Oct 12 14:28:48 neo kernel: Linux version 2.6.23.1-slh-smp-1 (slh@acer-292lmi) (gcc version 4.2.2 (Debian 4.2.2-1)) #1 SMP PREEMPT Fri Oct 12 20:41:31 CEST 2007
Oct 12 14:28:48 neo kernel: BIOS-provided physical RAM map:
Oct 12 14:28:48 neo kernel:  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 12 14:28:48 neo kernel:  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Oct 12 14:28:48 neo kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 12 14:28:48 neo kernel:  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
Oct 12 14:28:48 neo kernel:  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
Oct 12 14:28:48 neo kernel:  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
Oct 12 14:28:48 neo kernel:  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Oct 12 14:28:48 neo kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 12 14:28:48 neo kernel:  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Oct 12 14:28:48 neo kernel: 127MB HIGHMEM available.
Oct 12 14:28:48 neo kernel: 896MB LOWMEM available.
Oct 12 14:28:48 neo kernel: found SMP MP-table at 000f4ff0
Oct 12 14:28:48 neo kernel: Zone PFN ranges:
Oct 12 14:28:48 neo kernel:   DMA             0 ->     4096
Oct 12 14:28:48 neo kernel:   Normal       4096 ->   229376
Oct 12 14:28:48 neo kernel:   HighMem    229376 ->   262128
Oct 12 14:28:48 neo kernel: Movable zone start PFN for each node
Oct 12 14:28:48 neo kernel: early_node_map[1] active PFN ranges
Oct 12 14:28:48 neo kernel:     0:        0 ->   262128
Oct 12 14:28:48 neo kernel: DMI 2.3 present.
Oct 12 14:28:48 neo kernel: ACPI: RSDP 000F6A00, 0014 (r0 Nvidia)
Oct 12 14:28:48 neo kernel: ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
Oct 12 14:28:48 neo kernel: ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
Oct 12 14:28:48 neo kernel: ACPI: DSDT 3FFF30C0, 45AF (r1 NVIDIA AWRDACPI     1000 MSFT  100000C)
Oct 12 14:28:48 neo kernel: ACPI: FACS 3FFF0000, 0040
Oct 12 14:28:48 neo kernel: ACPI: APIC 3FFF7680, 005A (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
Oct 12 14:28:48 neo kernel: Nvidia board detected. Ignoring ACPI timer override.
Oct 12 14:28:48 neo kernel: If you got timer trouble try acpi_use_timer_override
Oct 12 14:28:48 neo kernel: ACPI: PM-Timer IO Port: 0x1008
Oct 12 14:28:48 neo kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 12 14:28:48 neo kernel: Processor #0 15:15 APIC version 16
Oct 12 14:28:48 neo kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Oct 12 14:28:48 neo kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 12 14:28:48 neo kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Oct 12 14:28:48 neo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 12 14:28:48 neo kernel: ACPI: BIOS IRQ0 pin2 override ignored.
Oct 12 14:28:48 neo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 12 14:28:48 neo kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Oct 12 14:28:48 neo kernel: Using ACPI (MADT) for SMP configuration information
Oct 12 14:28:48 neo kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Oct 12 14:28:48 neo kernel: swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Oct 12 14:28:48 neo kernel: swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
Oct 12 14:28:48 neo kernel: swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Oct 12 14:28:48 neo kernel: Built 1 zonelists in Zone order.  Total pages: 260081
Oct 12 14:28:48 neo kernel: Kernel command line: root=UUID=bb60e4d4-a126-4929-929b-d2caa7a811cc ro quiet vga=791 3
Oct 12 14:28:48 neo kernel: Enabling fast FPU save and restore... done.
Oct 12 14:28:48 neo kernel: Enabling unmasked SIMD FPU exception support... done.
Oct 12 14:28:48 neo kernel: Initializing CPU#0
Oct 12 14:28:48 neo kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Oct 12 14:28:48 neo kernel: Detected 1808.795 MHz processor.
Oct 12 14:28:48 neo kernel: Console: colour dummy device 80x25
Oct 12 14:28:48 neo kernel: console [tty0] enabled
Oct 12 14:28:48 neo kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 12 14:28:48 neo kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 12 14:28:48 neo kernel: Memory: 1028040k/1048512k available (2206k kernel code, 19752k reserved, 794k data, 336k init, 131008k highmem)
Oct 12 14:28:48 neo kernel: virtual kernel memory layout:
Oct 12 14:28:48 neo kernel:     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
Oct 12 14:28:48 neo kernel:     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Oct 12 14:28:48 neo kernel:     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Oct 12 14:28:48 neo kernel:     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Oct 12 14:28:48 neo kernel:       .init : 0xc03f5000 - 0xc0449000   ( 336 kB)
Oct 12 14:28:48 neo kernel:       .data : 0xc0327bc0 - 0xc03ee784   ( 794 kB)
Oct 12 14:28:48 neo kernel:       .text : 0xc0100000 - 0xc0327bc0   (2206 kB)
Oct 12 14:28:48 neo kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 12 14:28:48 neo kernel: SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Oct 12 14:28:48 neo kernel: Calibrating delay using timer specific routine.. 3618.73 BogoMIPS (lpj=1809367)
Oct 12 14:28:48 neo kernel: Security Framework v1.0.0 initialized
Oct 12 14:28:48 neo kernel: SELinux:  Disabled at boot.
Oct 12 14:28:48 neo kernel: Mount-cache hash table entries: 512
Oct 12 14:28:48 neo kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 12 14:28:48 neo kernel: CPU: L2 Cache: 512K (64 bytes/line)
Oct 12 14:28:48 neo kernel: Intel machine check architecture supported.
Oct 12 14:28:48 neo kernel: Intel machine check reporting enabled on CPU#0.
Oct 12 14:28:48 neo kernel: Compat vDSO mapped to ffffe000.
Oct 12 14:28:48 neo kernel: Checking 'hlt' instruction... OK.
Oct 12 14:28:48 neo kernel: SMP alternatives: switching to UP code
Oct 12 14:28:48 neo kernel: Freeing SMP alternatives: 11k freed
Oct 12 14:28:48 neo kernel: Early unpacking initramfs... done
Oct 12 14:28:48 neo kernel: ACPI: Core revision 20070126
Oct 12 14:28:48 neo kernel: ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Oct 12 14:28:48 neo kernel: CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Oct 12 14:28:48 neo kernel: Total of 1 processors activated (3618.73 BogoMIPS).
Oct 12 14:28:48 neo kernel: ENABLING IO-APIC IRQs
Oct 12 14:28:48 neo kernel: ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Oct 12 14:28:48 neo kernel: Brought up 1 CPUs
Oct 12 14:28:48 neo kernel: NET: Registered protocol family 16
Oct 12 14:28:48 neo kernel: EISA bus registered
Oct 12 14:28:48 neo kernel: ACPI: bus type pci registered
Oct 12 14:28:48 neo kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=2
Oct 12 14:28:48 neo kernel: PCI: Using configuration type 1
Oct 12 14:28:48 neo kernel: Setting up standard PCI resources
Oct 12 14:28:48 neo kernel: ACPI: Interpreter enabled
Oct 12 14:28:48 neo kernel: ACPI: (supports S0 S1 S4 S5)
Oct 12 14:28:48 neo kernel: ACPI: Using IOAPIC for interrupt routing
Oct 12 14:28:48 neo kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APC1] (IRQs *16)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APC3] (IRQs *18)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APC5] (IRQs *16)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCS] (IRQs *23)
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0
Oct 12 14:28:48 neo kernel: ACPI: Power Resource [ISAV] (on)
Oct 12 14:28:48 neo kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 12 14:28:48 neo kernel: pnp: PnP ACPI init
Oct 12 14:28:48 neo kernel: ACPI: bus type pnp registered
Oct 12 14:28:48 neo kernel: pnp: PnP ACPI: found 13 devices
Oct 12 14:28:48 neo kernel: ACPI: ACPI bus type pnp unregistered
Oct 12 14:28:48 neo kernel: PnPBIOS: Disabled by ACPI PNP
Oct 12 14:28:48 neo kernel: SCSI subsystem initialized
Oct 12 14:28:48 neo kernel: PCI: Using ACPI for IRQ routing
Oct 12 14:28:48 neo kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Oct 12 14:28:48 neo kernel: NET: Registered protocol family 8
Oct 12 14:28:48 neo kernel: NET: Registered protocol family 20
Oct 12 14:28:48 neo kernel: ACPI: RTC can wake from S4
Oct 12 14:28:48 neo kernel: Time: tsc clocksource has been installed.
Oct 12 14:28:48 neo kernel: pnp: 00:00: ioport range 0x1000-0x107f has been reserved
Oct 12 14:28:48 neo kernel: pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
Oct 12 14:28:48 neo kernel: pnp: 00:00: ioport range 0x1400-0x147f has been reserved
Oct 12 14:28:48 neo kernel: pnp: 00:00: ioport range 0x1480-0x14ff has been reserved
Oct 12 14:28:48 neo kernel: pnp: 00:00: ioport range 0x1800-0x187f has been reserved
Oct 12 14:28:48 neo kernel: pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
Oct 12 14:28:48 neo kernel: pnp: 00:01: iomem range 0xf0000-0xf3fff could not be reserved
Oct 12 14:28:48 neo kernel: pnp: 00:01: iomem range 0xf4000-0xf7fff could not be reserved
Oct 12 14:28:48 neo kernel: pnp: 00:01: iomem range 0xf8000-0xfbfff could not be reserved
Oct 12 14:28:48 neo kernel: pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved
Oct 12 14:28:48 neo kernel: PCI: Bridge: 0000:00:0b.0
Oct 12 14:28:48 neo kernel:   IO window: disabled.
Oct 12 14:28:48 neo kernel:   MEM window: f8000000-f9ffffff
Oct 12 14:28:48 neo kernel:   PREFETCH window: f0000000-f7ffffff
Oct 12 14:28:48 neo kernel: PCI: Bridge: 0000:00:0e.0
Oct 12 14:28:48 neo kernel:   IO window: 9000-9fff
Oct 12 14:28:48 neo kernel:   MEM window: fa000000-fbffffff
Oct 12 14:28:48 neo kernel:   PREFETCH window: 50000000-500fffff
Oct 12 14:28:48 neo kernel: NET: Registered protocol family 2
Oct 12 14:28:48 neo kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 12 14:28:48 neo kernel: TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Oct 12 14:28:48 neo kernel: TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
Oct 12 14:28:48 neo kernel: TCP: Hash tables configured (established 131072 bind 65536)
Oct 12 14:28:48 neo kernel: TCP reno registered
Oct 12 14:28:48 neo kernel: Unpacking initramfs... done
Oct 12 14:28:48 neo kernel: Freeing initrd memory: 7037k freed
Oct 12 14:28:48 neo kernel: Machine check exception polling timer started.
Oct 12 14:28:48 neo kernel: audit: initializing netlink socket (disabled)
Oct 12 14:28:48 neo kernel: audit(1192199311.879:1): initialized
Oct 12 14:28:48 neo kernel: highmem bounce pool size: 64 pages
Oct 12 14:28:48 neo kernel: Total HugeTLB memory allocated, 0
Oct 12 14:28:48 neo kernel: VFS: Disk quotas dquot_6.5.1
Oct 12 14:28:48 neo kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 12 14:28:48 neo kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Oct 12 14:28:48 neo kernel: io scheduler noop registered
Oct 12 14:28:48 neo kernel: io scheduler anticipatory registered
Oct 12 14:28:48 neo kernel: io scheduler deadline registered
Oct 12 14:28:48 neo kernel: io scheduler cfq registered (default)
Oct 12 14:28:48 neo kernel: vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 3072k, total 131072k
Oct 12 14:28:48 neo kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=1
Oct 12 14:28:48 neo kernel: vesafb: protected mode interface info at c000:f0c0
Oct 12 14:28:48 neo kernel: vesafb: pmi: set display start = c00cf0f6, set palette = c00cf160
Oct 12 14:28:48 neo kernel: vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Oct 12 14:28:48 neo kernel: vesafb: scrolling: redraw
Oct 12 14:28:48 neo kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Oct 12 14:28:48 neo kernel: Console: switching to colour frame buffer device 128x48
Oct 12 14:28:48 neo kernel: fb0: VESA VGA frame buffer device
Oct 12 14:28:48 neo kernel: isapnp: Scanning for PnP cards...
Oct 12 14:28:48 neo kernel: Switched to high resolution mode on CPU 0
Oct 12 14:28:48 neo kernel: isapnp: No Plug & Play device found
Oct 12 14:28:48 neo kernel: Real Time Clock Driver v1.12ac
Oct 12 14:28:48 neo kernel: Linux agpgart interface v0.102
Oct 12 14:28:48 neo kernel: agpgart: Detected AGP bridge 0
Oct 12 14:28:48 neo kernel: agpgart: Setting up Nforce3 AGP.
Oct 12 14:28:48 neo kernel: agpgart: AGP aperture is 128M @ 0xe8000000
Oct 12 14:28:48 neo kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 12 14:28:48 neo kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 12 14:28:48 neo kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 12 14:28:48 neo kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 12 14:28:48 neo kernel: 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 12 14:28:48 neo kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 12 14:28:48 neo kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 12 14:28:48 neo kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 12 14:28:48 neo kernel: mice: PS/2 mouse device common for all mice
Oct 12 14:28:48 neo kernel: EISA: Probing bus 0 at eisa.0
Oct 12 14:28:48 neo kernel: Cannot allocate resource for EISA slot 1
Oct 12 14:28:48 neo kernel: Cannot allocate resource for EISA slot 2
Oct 12 14:28:48 neo kernel: EISA: Detected 0 cards.
Oct 12 14:28:48 neo kernel: TCP cubic registered
Oct 12 14:28:48 neo kernel: NET: Registered protocol family 1
Oct 12 14:28:48 neo kernel: Using IPI No-Shortcut mode
Oct 12 14:28:48 neo kernel: Freeing unused kernel memory: 336k freed
Oct 12 14:28:48 neo kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Oct 12 14:28:48 neo kernel: usbcore: registered new interface driver usbfs
Oct 12 14:28:48 neo kernel: usbcore: registered new interface driver hub
Oct 12 14:28:48 neo kernel: usbcore: registered new device driver usb
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
Oct 12 14:28:48 neo kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
Oct 12 14:28:48 neo kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
Oct 12 14:28:48 neo kernel: ohci_hcd 0000:00:02.0: irq 16, io mem 0xfc002000
Oct 12 14:28:48 neo kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 12 14:28:48 neo kernel: hub 1-0:1.0: USB hub found
Oct 12 14:28:48 neo kernel: hub 1-0:1.0: 4 ports detected
Oct 12 14:28:48 neo kernel: 8139too Fast Ethernet driver 0.9.28
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
Oct 12 14:28:48 neo kernel: ohci_hcd 0000:00:02.1: OHCI Host Controller
Oct 12 14:28:48 neo kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
Oct 12 14:28:48 neo kernel: ohci_hcd 0000:00:02.1: irq 17, io mem 0xfc003000
Oct 12 14:28:48 neo kernel: usb usb2: configuration #1 chosen from 1 choice
Oct 12 14:28:48 neo kernel: hub 2-0:1.0: USB hub found
Oct 12 14:28:48 neo kernel: hub 2-0:1.0: 4 ports detected
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 18
Oct 12 14:28:48 neo kernel: eth0: RealTek RTL8139 at 0xf882a000, 00:e0:4c:ee:56:43, IRQ 18
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 19
Oct 12 14:28:48 neo kernel: ehci_hcd 0000:00:02.2: EHCI Host Controller
Oct 12 14:28:48 neo kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
Oct 12 14:28:48 neo kernel: ehci_hcd 0000:00:02.2: debug port 1
Oct 12 14:28:48 neo kernel: ehci_hcd 0000:00:02.2: irq 19, io mem 0xfc004000
Oct 12 14:28:48 neo kernel: ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 12 14:28:48 neo kernel: usb usb3: configuration #1 chosen from 1 choice
Oct 12 14:28:48 neo kernel: hub 3-0:1.0: USB hub found
Oct 12 14:28:48 neo kernel: hub 3-0:1.0: 8 ports detected
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
Oct 12 14:28:48 neo kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 16
Oct 12 14:28:49 neo kernel: scsi0 : sata_nv
Oct 12 14:28:49 neo kernel: scsi1 : sata_nv
Oct 12 14:28:49 neo kernel: ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001c400 irq 16
Oct 12 14:28:49 neo kernel: ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001c408 irq 16
Oct 12 14:28:49 neo kernel: usb 3-5: new high speed USB device using ehci_hcd and address 2
Oct 12 14:28:49 neo kernel: usb 3-5: configuration #1 chosen from 1 choice
Oct 12 14:28:49 neo kernel: hub 3-5:1.0: USB hub found
Oct 12 14:28:49 neo kernel: hub 3-5:1.0: 4 ports detected
Oct 12 14:28:49 neo kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 12 14:28:49 neo kernel: ata1.00: Host Protected Area detected:
Oct 12 14:28:49 neo kernel: ^Icurrent size: 586070255 sectors
Oct 12 14:28:49 neo kernel: ^Inative size: 586072368 sectors
Oct 12 14:28:49 neo kernel: ata1.00: ATA-7: ST3300622AS, 3.AAH, max UDMA/133
Oct 12 14:28:49 neo kernel: ata1.00: 586070255 sectors, multi 16: LBA48 NCQ (depth 0/32)
Oct 12 14:28:49 neo kernel: ata1.00: Host Protected Area detected:
Oct 12 14:28:49 neo kernel: ^Icurrent size: 586070255 sectors
Oct 12 14:28:49 neo kernel: ^Inative size: 586072368 sectors
Oct 12 14:28:49 neo kernel: ata1.00: configured for UDMA/133
Oct 12 14:28:49 neo kernel: usb 3-6: new high speed USB device using ehci_hcd and address 3
Oct 12 14:28:49 neo kernel: usb 3-6: configuration #1 chosen from 1 choice
Oct 12 14:28:49 neo kernel: usbcore: registered new interface driver libusual
Oct 12 14:28:49 neo kernel: Initializing USB Mass Storage driver...
Oct 12 14:28:49 neo kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Oct 12 14:28:49 neo kernel: usbcore: registered new interface driver usb-storage
Oct 12 14:28:49 neo kernel: USB Mass Storage support registered.
Oct 12 14:28:49 neo kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 12 14:28:49 neo kernel: ata2.00: ATA-7: ST3300620AS, 3.AAE, max UDMA/133
Oct 12 14:28:49 neo kernel: ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
Oct 12 14:28:49 neo kernel: ata2.00: configured for UDMA/133
Oct 12 14:28:49 neo kernel: scsi 0:0:0:0: Direct-Access     ATA      ST3300622AS      3.AA PQ: 0 ANSI: 5
Oct 12 14:28:49 neo kernel: scsi 1:0:0:0: Direct-Access     ATA      ST3300620AS      3.AA PQ: 0 ANSI: 5
Oct 12 14:28:49 neo kernel: scsi3 : pata_amd
Oct 12 14:28:49 neo kernel: scsi4 : pata_amd
Oct 12 14:28:49 neo kernel: ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
Oct 12 14:28:49 neo kernel: ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
Oct 12 14:28:49 neo kernel: sd 0:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
Oct 12 14:28:49 neo kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 12 14:28:49 neo kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 14:28:49 neo kernel: sd 0:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
Oct 12 14:28:49 neo kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 12 14:28:49 neo kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 14:28:49 neo kernel:  sda: sda1 sda2 < sda5 sda6 sda7 > sda3
Oct 12 14:28:49 neo kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Oct 12 14:28:49 neo kernel: sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
Oct 12 14:28:49 neo kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 12 14:28:49 neo kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 14:28:49 neo kernel: sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
Oct 12 14:28:49 neo kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 12 14:28:49 neo kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 12 14:28:49 neo kernel:  sdb: sdb1
Oct 12 14:28:49 neo kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
Oct 12 14:28:49 neo kernel: ata3.00: ATAPI: TSSTcorpCD/DVDW TS-H552U, US03, max UDMA/33
Oct 12 14:28:49 neo kernel: ata3.00: configured for UDMA/33
Oct 12 14:28:49 neo kernel: scsi 3:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-H552U US03 PQ: 0 ANSI: 5
Oct 12 14:28:49 neo kernel: sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
Oct 12 14:28:49 neo kernel: Uniform CD-ROM driver Revision: 3.20
Oct 12 14:28:49 neo kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 12 14:28:49 neo kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Oct 12 14:28:49 neo kernel: sr 3:0:0:0: Attached scsi generic sg2 type 5
Oct 12 14:28:49 neo kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Oct 12 14:28:49 neo kernel: swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
Oct 12 14:28:49 neo kernel: swsusp: Basic memory bitmaps created
Oct 12 14:28:49 neo kernel: swsusp: Basic memory bitmaps freed
Oct 12 14:28:49 neo kernel: kjournald starting.  Commit interval 5 seconds
Oct 12 14:28:49 neo kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 12 14:28:49 neo kernel: input: PC Speaker as /devices/platform/pcspkr/input/input1
Oct 12 14:28:49 neo kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 12 14:28:49 neo kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 12 14:28:49 neo kernel: parport_pc 00:0a: reported by Plug and Play ACPI
Oct 12 14:28:49 neo kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Oct 12 14:28:49 neo kernel: i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
Oct 12 14:28:49 neo kernel: i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
Oct 12 14:28:49 neo kernel: input: PS2++ Logitech TrackMan as /devices/platform/i8042/serio1/input/input2
Oct 12 14:28:49 neo kernel: parport0: Printer, HEWLETT-PACKARD DESKJET 940C
Oct 12 14:28:49 neo kernel: input: Power Button (FF) as /devices/virtual/input/input3
Oct 12 14:28:49 neo kernel: ACPI: Power Button (FF) [PWRF]
Oct 12 14:28:49 neo kernel: input: Power Button (CM) as /devices/virtual/input/input4
Oct 12 14:28:49 neo kernel: ACPI: Power Button (CM) [PWRB]
Oct 12 14:28:49 neo kernel: scsi 2:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9335 PQ: 0 ANSI: 0
Oct 12 14:28:49 neo kernel: sd 2:0:0:0: [sdc] Attached SCSI removable disk
Oct 12 14:28:49 neo kernel: sd 2:0:0:0: Attached scsi generic sg3 type 0
Oct 12 14:28:49 neo kernel: gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0x9800, speed 59659kHz
Oct 12 14:28:49 neo kernel: ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Oct 12 14:28:49 neo kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
Oct 12 14:28:49 neo kernel: usb 1-4: new full speed USB device using ohci_hcd and address 3
Oct 12 14:28:49 neo kernel: usb 1-4: configuration #1 chosen from 1 choice
Oct 12 14:28:49 neo kernel: scsi5 : SCSI emulation for USB Mass Storage devices
Oct 12 14:28:49 neo kernel: Adding 1036184k swap on /dev/sda3.  Priority:-1 extents:1 across:1036184k
Oct 12 14:28:49 neo kernel: EXT3 FS on sda1, internal journal
Oct 12 14:28:49 neo kernel: Capability LSM initialized
Oct 12 14:28:49 neo kernel: it87: Found IT8712F chip at 0x290, revision 5
Oct 12 14:28:49 neo kernel: fuse init (API version 7.8)
Oct 12 14:28:49 neo kernel: kjournald starting.  Commit interval 5 seconds
Oct 12 14:28:49 neo kernel: EXT3 FS on sda5, internal journal
Oct 12 14:28:49 neo kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 12 14:28:49 neo kernel: kjournald starting.  Commit interval 5 seconds
Oct 12 14:28:49 neo kernel: EXT3 FS on sda6, internal journal
Oct 12 14:28:49 neo kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 12 14:28:49 neo kernel: kjournald starting.  Commit interval 5 seconds
Oct 12 14:28:49 neo kernel: EXT3 FS on sda7, internal journal
Oct 12 14:28:49 neo kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 12 14:28:49 neo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 12 14:28:49 neo kernel: NET: Registered protocol family 10
Oct 12 14:28:49 neo kernel: lo: Disabled Privacy Extensions
Oct 12 14:28:49 neo kernel: scsi 5:0:0:0: Direct-Access     SanDisk  ImageMate II     1.30 PQ: 0 ANSI: 2
Oct 12 14:28:49 neo kernel: sd 5:0:0:0: [sdd] Attached SCSI removable disk
Oct 12 14:28:49 neo kernel: sd 5:0:0:0: Attached scsi generic sg4 type 0
Oct 12 14:28:49 neo kernel: powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.00.00)
Oct 12 14:28:49 neo kernel: powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
Oct 12 14:28:49 neo kernel: powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
Oct 12 14:28:51 neo hpiod: 1.6.10 accepting connections at 2208...
Oct 12 14:28:54 neo kernel: lp0: using parport0 (interrupt-driven).
Oct 12 14:28:54 neo kernel: lp0: console ready
Oct 12 14:28:54 neo kernel: ppdev: user-space parallel port driver
Oct 12 14:28:55 neo cupsd[3154]: *** WARNING *** The program 'cupsd' uses the Apple Bonjour compatibility layer of Avahi.
Oct 12 14:28:55 neo cupsd[3154]: *** WARNING *** Please fix your application to use the native API of Avahi!
Oct 12 14:28:55 neo cupsd[3154]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=cupsd>
Oct 12 14:28:55 neo kernel: Marking TSC unstable due to: cpufreq changes.
Oct 12 14:28:55 neo kernel: Time: acpi_pm clocksource has been installed.
Oct 12 14:28:55 neo kernel: Clocksource tsc unstable (delta = -78189426 ns)
Oct 12 14:28:57 neo kernel: Netfilter messages via NETLINK v0.30.
Oct 12 14:28:57 neo kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Oct 12 14:28:57 neo kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 12 14:28:57 neo kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 12 14:28:58 neo kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Oct 12 14:28:58 neo kernel: NFSD: starting 90-second grace period
Oct 12 14:28:59 neo kernel: NET: Registered protocol family 17
Oct 12 14:29:00 neo kernel: device eth0 entered promiscuous mode
Oct 12 14:29:00 neo kernel: audit(1192220940.535:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
Oct 12 14:29:00 neo kernel: device eth0 left promiscuous mode
Oct 12 14:29:00 neo kernel: audit(1192220940.538:3): dev=eth0 prom=0 old_prom=256 auid=4294967295
Oct 12 14:29:00 neo kernel: device eth0 entered promiscuous mode
Oct 12 14:29:00 neo kernel: audit(1192220940.541:4): dev=eth0 prom=256 old_prom=0 auid=4294967295
Oct 12 14:29:02 neo powersaved: Starting powersaved with ACPI support
Oct 12 14:29:03 neo dhcpd: Internet Systems Consortium DHCP Server V3.0.6
Oct 12 14:29:03 neo dhcpd: Copyright 2004-2007 Internet Systems Consortium.
Oct 12 14:29:03 neo dhcpd: All rights reserved.
Oct 12 14:29:03 neo dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Oct 12 14:29:03 neo dhcpd: Internet Systems Consortium DHCP Server V3.0.6
Oct 12 14:29:03 neo dhcpd: Copyright 2004-2007 Internet Systems Consortium.
Oct 12 14:29:03 neo dhcpd: All rights reserved.
Oct 12 14:29:03 neo dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
Oct 12 14:29:03 neo dhcpd: Wrote 0 leases to leases file.
Oct 12 14:29:03 neo dhcpd:
Oct 12 14:31:42 neo kernel: device eth0 left promiscuous mode
Oct 12 14:31:42 neo kernel: audit(1192221102.306:5): dev=eth0 prom=0 old_prom=256 auid=4294967295
Oct 12 14:31:45 neo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 12 14:32:57 neo kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1



dmesg is breaking somehow. Posting in separate post. This is annoying.

_________________
 
 View user's profile Send private message Visit poster's website  
Reply with quote Back to top
RazberrieTart
Post subject:   PostPosted: Oct 12, 2007 - 09:29 PM



Joined: Mar 22, 2007
Posts: 436
Location: The Forest
Status: Offline
dmesg

Code:
 Linux version 2.6.23.1-slh-smp-1 (slh@acer-292lmi) (gcc version 4.2.2 (Debian 4.2.2-1)) #1 SMP PREEMPT Fri Oct 12 20:41:31 CEST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4ff0
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   262128
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   262128
On node 0 totalpages: 262128
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 255 pages used for memmap
  HighMem zone: 32497 pages, LIFO batch:7
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6A00, 0014 (r0 Nvidia)
ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
ACPI: DSDT 3FFF30C0, 45AF (r1 NVIDIA AWRDACPI     1000 MSFT  100000C)
ACPI: FACS 3FFF0000, 0040
ACPI: APIC 3FFF7680, 005A (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 260081
Kernel command line: root=UUID=bb60e4d4-a126-4929-929b-d2caa7a811cc ro quiet vga=791 3
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1808.795 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1028040k/1048512k available (2206k kernel code, 19752k reserved, 794k data, 336k init, 131008k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc03f5000 - 0xc0449000   ( 336 kB)
      .data : 0xc0327bc0 - 0xc03ee784   ( 794 kB)
      .text : 0xc0100000 - 0xc0327bc0   (2206 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 3618.73 BogoMIPS (lpj=1809367)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000001 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000000 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Total of 1 processors activated (3618.73 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0
ACPI: Power Resource [ISAV] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
pnp: 00:00: ioport range 0x1000-0x107f has been reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff has been reserved
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: iomem range 0xf0000-0xf3fff could not be reserved
pnp: 00:01: iomem range 0xf4000-0xf7fff could not be reserved
pnp: 00:01: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: f8000000-f9ffffff
  PREFETCH window: f0000000-f7ffffff
PCI: Bridge: 0000:00:0e.0
  IO window: 9000-9fff
  MEM window: fa000000-fbffffff
  PREFETCH window: 50000000-500fffff
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 7037k freed
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1192199311.879:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:f0c0
vesafb: pmi: set display start = c00cf0f6, set palette = c00cf160
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 128M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 336k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 16, io mem 0xfc002000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
libata version 2.21 loaded.
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 17, io mem 0xfc003000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xf882a000, 00:e0:4c:ee:56:43, IRQ 18
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 19
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 19, io mem 0xfc004000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
sata_nv 0000:00:0a.0: version 3.5
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0a.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001c400 irq 16
ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001c408 irq 16
usb 3-5: new high speed USB device using ehci_hcd and address 2
usb 3-5: configuration #1 chosen from 1 choice
hub 3-5:1.0: USB hub found
hub 3-5:1.0: 4 ports detected
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: Host Protected Area detected:
   current size: 586070255 sectors
   native size: 586072368 sectors
ata1.00: ATA-7: ST3300622AS, 3.AAH, max UDMA/133
ata1.00: 586070255 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: Host Protected Area detected:
   current size: 586070255 sectors
   native size: 586072368 sectors
ata1.00: configured for UDMA/133
usb 3-6: new high speed USB device using ehci_hcd and address 3
usb 3-6: configuration #1 chosen from 1 choice
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: ST3300620AS, 3.AAE, max UDMA/133
ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3300622AS      3.AA PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     ATA      ST3300620AS      3.AA PQ: 0 ANSI: 5
pata_amd 0000:00:08.0: version 0.3.9
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi3 : pata_amd
scsi4 : pata_amd
ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
sd 0:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 > sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3.00: ATAPI: TSSTcorpCD/DVDW TS-H552U, US03, max UDMA/33
ata3.00: configured for UDMA/33
ata4: port disabled. ignoring.
scsi 3:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-H552U US03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 3:0:0:0: Attached scsi generic sg2 type 5
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /devices/platform/pcspkr/input/input1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
input: PS2++ Logitech TrackMan as /devices/platform/i8042/serio1/input/input2
parport0: Printer, HEWLETT-PACKARD DESKJET 940C
input: Power Button (FF) as /devices/virtual/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input4
ACPI: Power Button (CM) [PWRB]
scsi 2:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9335 PQ: 0 ANSI: 0
sd 2:0:0:0: [sdc] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0x9800, speed 59659kHz
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
usb 1-4: new full speed USB device using ohci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Adding 1036184k swap on /dev/sda3.  Priority:-1 extents:1 across:1036184k
EXT3 FS on sda1, internal journal
Capability LSM initialized
it87: Found IT8712F chip at 0x290, revision 5
fuse init (API version 7.8)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
scsi 5:0:0:0: Direct-Access     SanDisk  ImageMate II     1.30 PQ: 0 ANSI: 2
sd 5:0:0:0: [sdd] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg4 type 0
usb-storage: device scan complete
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.00.00)
powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
lp0: using parport0 (interrupt-driven).
lp0: console ready
ppdev: user-space parallel port driver
Marking TSC unstable due to: cpufreq changes.
Time: acpi_pm clocksource has been installed.
Clocksource tsc unstable (delta = -78189426 ns)
eth0: no IPv6 routers present
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
NET: Registered protocol family 17
device eth0 entered promiscuous mode
audit(1192220940.535:2): dev=eth0 prom=256 old_prom=0 auid=4294967295
device eth0 left promiscuous mode
audit(1192220940.538:3): dev=eth0 prom=0 old_prom=256 auid=4294967295
device eth0 entered promiscuous mode
audit(1192220940.541:4): dev=eth0 prom=256 old_prom=0 auid=4294967295
device eth0 left promiscuous mode
audit(1192221102.306:5): dev=eth0 prom=0 old_prom=256 auid=4294967295
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present



lsmod

Code:
 Module                  Size  Used by
nfnetlink_queue        13760  0
binfmt_misc            13192  1
af_packet              25096  0
nfsd                  230512  13
exportfs                6784  1 nfsd
auth_rpcgss            43552  1 nfsd
nf_conntrack_ipv4      19592  3
xt_tcpudp               4352  4
iptable_filter          4096  1
ip_tables              14948  1 iptable_filter
xt_state                3584  3
nf_conntrack           67784  2 nf_conntrack_ipv4,xt_state
nfnetlink               7064  3 nfnetlink_queue,nf_conntrack_ipv4,nf_conntrack
xt_NFQUEUE              3072  3
x_tables               16644  4 xt_tcpudp,ip_tables,xt_state,xt_NFQUEUE
ppdev                  10500  0
lp                     13832  0
ac                      6532  0
battery                13192  0
powernow_k8            16064  0
cpufreq_powersave       2816  0
cpufreq_stats           7360  0
cpufreq_ondemand        9740  1
freq_table              5792  3 powernow_k8,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative     8200  0
nfs                   263308  0
lockd                  68360  3 nfsd,nfs
nfs_acl                 4736  2 nfsd,nfs
sunrpc                175132  9 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ipv6                  275108  26
fuse                   47252  1
it87                   20364  0
hwmon_vid               4224  1 it87
eeprom                  8336  0
capability              6024  0
commoncap               8448  1 capability
snd_emu10k1_synth       8448  0
snd_emux_synth         35968  1 snd_emu10k1_synth
snd_seq_virmidi         8448  1 snd_emux_synth
snd_seq_midi_emul       7808  1 snd_emux_synth
snd_emu10k1           141472  1 snd_emu10k1_synth
snd_seq_dummy           4868  0
snd_seq_oss            33664  0
snd_seq_midi            9600  0
snd_seq_midi_event      8576  3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq                53744  9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_rawmidi            25856  3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_ac97_codec         99876  1 snd_emu10k1
ac97_bus                3456  1 snd_ac97_codec
snd_pcm_oss            44544  0
snd_mixer_oss          17920  1 snd_pcm_oss
snd_pcm                80900  3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_seq_device          9484  8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd_timer              24580  3 snd_emu10k1,snd_seq,snd_pcm
snd_page_alloc         11528  2 snd_emu10k1,snd_pcm
snd_util_mem            5888  2 snd_emux_synth,snd_emu10k1
snd_hwdep              10628  2 snd_emux_synth,snd_emu10k1
snd                    55556  13 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_seq_oss,snd_seq,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
emu10k1_gp              4992  0
gameport               16904  2 emu10k1_gp
soundcore               9312  1 snd
button                  9232  0
i2c_nforce2             7424  0
psmouse                40976  0
parport_pc             41700  1
parport                38088  3 ppdev,lp,parport_pc
k8temp                  6656  0
shpchp                 34708  0
pci_hotplug            32416  1 shpchp
i2c_core               26240  2 eeprom,i2c_nforce2
evdev                  11392  3
serio_raw               8196  0
pcspkr                  4224  0
ext3                  135432  4
jbd                    62504  1 ext3
dm_mirror              25344  0
dm_snapshot            19880  0
dm_mod                 59712  2 dm_mirror,dm_snapshot
sg                     36124  0
sr_mod                 19108  0
cdrom                  37536  1 sr_mod
sd_mod                 30848  6
usb_storage            69440  0
libusual               18192  1 usb_storage
pata_amd               14084  0
sata_nv                20996  5
ehci_hcd               36108  0
8139too                28288  0
mii                     6656  1 8139too
ata_generic             8708  0
libata                124980  3 pata_amd,sata_nv,ata_generic
ohci_hcd               23556  0
usbcore               137736  5 usb_storage,libusual,ehci_hcd,ohci_hcd
thermal                16412  0
processor              35208  2 powernow_k8,thermal
fan                     6020  0


'crosses fingers'

_________________
 
 View user's profile Send private message Visit poster's website  
Reply with quote Back to top
mylo
Post subject:   PostPosted: Oct 12, 2007 - 11:15 PM



Joined: Dec 05, 2006
Posts: 1029
Location: Wiesbaden, Germany
Status: Offline
take the kernel from the oven when baked well

_________________
Viele Grüße
mylo

sidux [Έρως]@2.6.27-7.slh.1-686 Intel Core2 Duo E6550 @ Cache/Ram 4MB/4GB nVidia G72 7300 2*250GB

scroogle.org: an alternate web search?
 
 View user's profile Send private message  
Reply with quote Back to top
hubi
Post subject:   PostPosted: Oct 12, 2007 - 11:27 PM



Joined: Nov 30, 2006
Posts: 3481
Location: Budapest
Status: Offline
WLAN?

Just realized some weird renaming on my Broadcom Wireless. Connected as eth1 till 2.6.23, now it renames itself to "wlan0_rename". No chance to get this beast running at the moment.

Maybe someone can help out.

You can check through
Code:
ifconfig
If a weird network device name appears, then it's that.

I give it a last try before falling back to 2.6.22.9.

hubi

_________________
Bonitas stultitiaque sodales sunt.
 
 View user's profile Send private message  
Reply with quote Back to top
hubi
Post subject:   PostPosted: Oct 12, 2007 - 11:43 PM



Joined: Nov 30, 2006
Posts: 3481
Location: Budapest
Status: Offline
Well, it is a showstopper for me at the moment, because I cannot identify where the renaming of the Broadcom interface comes from. No tweaking of interfaces works.
Code:
$ lspci
<snip>
02:03.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
Brilliantly working interfaces with wpa-roaming till now:
Code:
cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
# automatically added when upgrading
auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp
post-up /sbin/ifconfig eth0 mtu 1500

allow-hotplug eth1
iface eth1 inet manual
  wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface home inet dhcp
iface stalk inet dhcp
Here ifconfig with 2.6.22.9:
Code:
# ifconfig
eth0      Protokoll:Ethernet  Hardware Adresse 00:C0:9F:3A:BE:7C
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:21 Basisadresse:0x8800

eth1      Protokoll:Ethernet  Hardware Adresse 00:90:4B:54:3B:E1
          inet Adresse:192.168.2.192  Bcast:192.168.2.255  Maske:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:576  Metric:1
          RX packets:1173 errors:0 dropped:7 overruns:0 frame:0
          TX packets:908 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000
          RX bytes:564353 (551.1 KiB)  TX bytes:72492 (70.7 KiB)
          Interrupt:10 Basisadresse:0xc000
<snip lo, vmnet1, vmnet8>
Booting into 2.6.23 does not have eth1 in ifconfig at all, but iwlist s reveals the weird namechange:
Code:
# iwlist s
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

eth1      Interface doesn't support scanning.

wlan0_rename  Interface doesn't support scanning : Network is down

vmnet1    Interface doesn't support scanning.

vmnet8    Interface doesn't support scanning.
I changed /etc/network/interfaces then to:
Code:
# cat interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
# automatically added when upgrading
auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp
post-up /sbin/ifconfig eth0 mtu 1500

allow-hotplug wlan0_rename
iface wlan0_rename inet manual
  wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface home inet dhcp
iface stalk inet dhcp
After some ifups, ifdowns, wpa_action wlan0_rename reload I really got the thing going, but on shutdown, wpa_action froze with a bug message on the terminal (sorry, did not write it down). I had to reboot by alt+prtscr+"RSEIUB". Bringing the kernel up, same story again: no wpa_action, no wireless connection.

So, that's really a showstopper, and at some stage at the weekend I might check if ipw2200 is behaving as eratically as this broadcom chip.

Back to 2.6.22.9 for now, there seems to be no major bug in it anyway.

hubi

_________________
Bonitas stultitiaque sodales sunt.
 
 View user's profile Send private message  
Reply with quote Back to top
RazberrieTart
Post subject:   PostPosted: Oct 13, 2007 - 12:50 AM



Joined: Mar 22, 2007
Posts: 436
Location: The Forest
Status: Offline
Hubi, no wireless, all wired, and yes, we tried ifconfig... Some are running fine on it, some aren't. It's pretty odd for sure.

_________________
 
 View user's profile Send private message Visit poster's website  
Reply with quote Back to top
hubi
Post subject:   PostPosted: Oct 13, 2007 - 12:51 AM



Joined: Nov 30, 2006
Posts: 3481
Location: Budapest
Status: Offline
ipw2200 up and running with 2.6.23.1 on the vaio. No weird renaming. Too tired now to check this kernel on my HP to track the problem down, but the announcement does not mention any relation to a wireless/network problem:
http://lkml.org/lkml/2007/10/12/302

hubi

_________________
Bonitas stultitiaque sodales sunt.
 
 View user's profile