| Author |
Message |
|
|
Post subject: System hangs on booting all available kernels.
 Posted: Aug 13, 2008 - 07:14 PM
|
|
Joined: Jan 12, 2007
Posts: 73
Status: Offline
|
|
Yesterday I did a dist-upgrade with smxi script , all went fine also after reboot.
But then I had to boot into my winXP partition , which went fine, and when I wanted to boot to sidux again, the system stops after a few bootup messages and gives me a login prompt , but when I login (in cl) nothing is loaded, and I can't get anywhere from here, no apt-get , no smxi script , no mc nothing.
I tried 4 other kernels from mu grub menu but all the same.
I think the problem starts on bootup after this message ;
Loading the saved-state of the serial devices........
then a lot of messages about /etc/rcS.d/ scripts that refer to a command to a command that is not found
some of the related scripts in /etc/rcS.d are
S41hostname.dhcp
S48consol-screen.kbd.sh
S55bootmisc.sh
I loaded a live CD to see error in /var/log messages ;
Aug 13 20:27:14 jacksbox1 syslogd 1.5.0#5: restart.
Aug 13 20:27:14 jacksbox1 kernel: klogd 1.5.0#5, log source = /proc/kmsg started.
Aug 13 20:27:14 jacksbox1 kernel: Linux version 2.6.22.10-rc1-slh-smp-1 (slh@acer-292lmi) (gcc version 4.2.1 (Debian 4.2.1-6)) #1 SMP PREEMPT Mon Oct 8 20:54:24 CEST 2007
Aug 13 20:27:14 jacksbox1 kernel: BIOS-provided physical RAM map:
Aug 13 20:27:14 jacksbox1 kernel: BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Aug 13 20:27:14 jacksbox1 kernel: BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Aug 13 20:27:14 jacksbox1 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 13 20:27:14 jacksbox1 kernel: BIOS-e820: 0000000000100000 - 0000000037ef0000 (usable)
Aug 13 20:27:14 jacksbox1 kernel: BIOS-e820: 0000000037ef0000 - 0000000037ef3000 (ACPI NVS)
Aug 13 20:27:14 jacksbox1 kernel: BIOS-e820: 0000000037ef3000 - 0000000037f00000 (ACPI data)
Aug 13 20:27:14 jacksbox1 kernel: BIOS-e820: 0000000038000000 - 0000000040000000 (reserved)
Aug 13 20:27:14 jacksbox1 kernel: BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
Aug 13 20:27:14 jacksbox1 kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Aug 13 20:27:14 jacksbox1 kernel: 0MB HIGHMEM available.
Aug 13 20:27:14 jacksbox1 kernel: 894MB LOWMEM available.
Aug 13 20:27:14 jacksbox1 kernel: found SMP MP-table at 000f5860
Aug 13 20:27:14 jacksbox1 kernel: Zone PFN ranges:
Aug 13 20:27:14 jacksbox1 kernel: DMA 0 -> 4096
Aug 13 20:27:14 jacksbox1 kernel: Normal 4096 -> 229104
Aug 13 20:27:14 jacksbox1 kernel: HighMem 229104 -> 229104
Aug 13 20:27:14 jacksbox1 kernel: early_node_map[1] active PFN ranges
Aug 13 20:27:14 jacksbox1 kernel: 0: 0 -> 229104
Aug 13 20:27:14 jacksbox1 kernel: DMI present.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: RSDP 000F7440, 0024 (r2 HPQOEM)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: XSDT 37EF30C0, 0054 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: FACP 37EF90C0, 00F4 (r3 HPQOEM SLIC-CPC 42302E31 AWRD 0)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: DSDT 37EF3280, 5DF3 (r1 HPQOEM SLIC-CPC 1000 MSFT 3000000)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: FACS 37EF0000, 0040
Aug 13 20:27:14 jacksbox1 kernel: ACPI: SLIC 37EF92C0, 0176 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: SSDT 37EF9480, 01C4 (r1 HPQOEM SLIC-CPC 1 LTP 1)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: HPET 37EF96C0, 0038 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 9
Aug 13 20:27:14 jacksbox1 kernel: ACPI: MCFG 37EF9740, 003C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: APIC 37EF9200, 007C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PM-Timer IO Port: 0x4008
Aug 13 20:27:14 jacksbox1 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 13 20:27:14 jacksbox1 kernel: Processor #0 15:11 APIC version 16
Aug 13 20:27:14 jacksbox1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Aug 13 20:27:14 jacksbox1 kernel: Processor #1 15:11 APIC version 16
Aug 13 20:27:14 jacksbox1 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 13 20:27:14 jacksbox1 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Aug 13 20:27:14 jacksbox1 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 13 20:27:14 jacksbox1 kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Aug 13 20:27:14 jacksbox1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Aug 13 20:27:14 jacksbox1 kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Aug 13 20:27:14 jacksbox1 kernel: ACPI: HPET id: 0x10de8201 base: 0xfefff000
Aug 13 20:27:14 jacksbox1 kernel: Using ACPI (MADT) for SMP configuration information
Aug 13 20:27:14 jacksbox1 kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
Aug 13 20:27:14 jacksbox1 kernel: Built 1 zonelists. Total pages: 227315
Aug 13 20:27:14 jacksbox1 kernel: Kernel command line: root=UUID=92d901a2-c89c-4024-9d56-a9b8a2a94ba2 ro quiet vga=791 libata.atapi_enabled=1
Aug 13 20:27:14 jacksbox1 kernel: Enabling fast FPU save and restore... done.
Aug 13 20:27:14 jacksbox1 kernel: Enabling unmasked SIMD FPU exception support... done.
Aug 13 20:27:14 jacksbox1 kernel: Initializing CPU#0
Aug 13 20:27:14 jacksbox1 kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Aug 13 20:27:14 jacksbox1 kernel: Detected 2004.317 MHz processor.
Aug 13 20:27:14 jacksbox1 kernel: Console: colour dummy device 80x25
Aug 13 20:27:14 jacksbox1 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug 13 20:27:14 jacksbox1 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 13 20:27:14 jacksbox1 kernel: Memory: 897864k/916416k available (2177k kernel code, 17832k reserved, 784k data, 356k init, 0k highmem)
Aug 13 20:27:14 jacksbox1 kernel: virtual kernel memory layout:
Aug 13 20:27:14 jacksbox1 kernel: fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
Aug 13 20:27:14 jacksbox1 kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Aug 13 20:27:14 jacksbox1 kernel: vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Aug 13 20:27:14 jacksbox1 kernel: lowmem : 0xc0000000 - 0xf7ef0000 ( 894 MB)
Aug 13 20:27:14 jacksbox1 kernel: .init : 0xc03eb000 - 0xc0444000 ( 356 kB)
Aug 13 20:27:14 jacksbox1 kernel: .data : 0xc03204a7 - 0xc03e46c4 ( 784 kB)
Aug 13 20:27:14 jacksbox1 kernel: .text : 0xc0100000 - 0xc03204a7 (2177 kB)
Aug 13 20:27:14 jacksbox1 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug 13 20:27:14 jacksbox1 kernel: SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Aug 13 20:27:14 jacksbox1 kernel: hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
Aug 13 20:27:14 jacksbox1 kernel: hpet0: 3 32-bit timers, 25000000 Hz
Aug 13 20:27:14 jacksbox1 kernel: Calibrating delay using timer specific routine.. 4010.75 BogoMIPS (lpj=2005377)
Aug 13 20:27:14 jacksbox1 kernel: Security Framework v1.0.0 initialized
Aug 13 20:27:14 jacksbox1 kernel: SELinux: Disabled at boot.
Aug 13 20:27:14 jacksbox1 kernel: Mount-cache hash table entries: 512
Aug 13 20:27:14 jacksbox1 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Aug 13 20:27:14 jacksbox1 kernel: CPU: L2 Cache: 512K (64 bytes/line)
Aug 13 20:27:14 jacksbox1 kernel: CPU 0(2) -> Core 0
Aug 13 20:27:14 jacksbox1 kernel: Intel machine check architecture supported.
Aug 13 20:27:14 jacksbox1 kernel: Intel machine check reporting enabled on CPU#0.
Aug 13 20:27:14 jacksbox1 kernel: Compat vDSO mapped to ffffe000.
Aug 13 20:27:14 jacksbox1 kernel: Checking 'hlt' instruction... OK.
Aug 13 20:27:14 jacksbox1 kernel: SMP alternatives: switching to UP code
Aug 13 20:27:14 jacksbox1 kernel: Early unpacking initramfs... done
Aug 13 20:27:14 jacksbox1 kernel: ACPI: Core revision 20070126
Aug 13 20:27:14 jacksbox1 kernel: ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Aug 13 20:27:14 jacksbox1 kernel: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Aug 13 20:27:14 jacksbox1 kernel: SMP alternatives: switching to SMP code
Aug 13 20:27:14 jacksbox1 kernel: Booting processor 1/1 eip 3000
Aug 13 20:27:14 jacksbox1 kernel: Initializing CPU#1
Aug 13 20:27:14 jacksbox1 kernel: Calibrating delay using timer specific routine.. 4008.24 BogoMIPS (lpj=2004123)
Aug 13 20:27:14 jacksbox1 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Aug 13 20:27:14 jacksbox1 kernel: CPU: L2 Cache: 512K (64 bytes/line)
Aug 13 20:27:14 jacksbox1 kernel: CPU 1(2) -> Core 1
Aug 13 20:27:14 jacksbox1 kernel: Intel machine check architecture supported.
Aug 13 20:27:14 jacksbox1 kernel: Intel machine check reporting enabled on CPU#1.
Aug 13 20:27:14 jacksbox1 kernel: CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Aug 13 20:27:14 jacksbox1 kernel: Total of 2 processors activated (8019.00 BogoMIPS).
Aug 13 20:27:14 jacksbox1 kernel: ENABLING IO-APIC IRQs
Aug 13 20:27:14 jacksbox1 kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 13 20:27:14 jacksbox1 kernel: Brought up 2 CPUs
Aug 13 20:27:14 jacksbox1 kernel: migration_cost=1000
Aug 13 20:27:14 jacksbox1 kernel: NET: Registered protocol family 16
Aug 13 20:27:14 jacksbox1 kernel: EISA bus registered
Aug 13 20:27:14 jacksbox1 kernel: ACPI: bus type pci registered
Aug 13 20:27:14 jacksbox1 kernel: PCI: Using MMCONFIG
Aug 13 20:27:14 jacksbox1 kernel: PCI: No mmconfig possible on device 00:18
Aug 13 20:27:14 jacksbox1 kernel: Setting up standard PCI resources
Aug 13 20:27:14 jacksbox1 kernel: ACPI: Interpreter enabled
Aug 13 20:27:14 jacksbox1 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: Using IOAPIC for interrupt routing
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 13 20:27:14 jacksbox1 kernel: PCI: Transparent bridge - 0000:00:10.0
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 *10 11 14 15)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APC3] (IRQs 1 *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
Aug 13 20:27:14 jacksbox1 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 13 20:27:14 jacksbox1 kernel: pnp: PnP ACPI init
Aug 13 20:27:14 jacksbox1 kernel: ACPI: bus type pnp registered
Aug 13 20:27:14 jacksbox1 kernel: pnp: PnP ACPI: found 11 devices
Aug 13 20:27:14 jacksbox1 kernel: ACPI: ACPI bus type pnp unregistered
Aug 13 20:27:14 jacksbox1 kernel: PnPBIOS: Disabled by ACPI PNP
Aug 13 20:27:14 jacksbox1 kernel: SCSI subsystem initialized
Aug 13 20:27:14 jacksbox1 kernel: PCI: Using ACPI for IRQ routing
Aug 13 20:27:14 jacksbox1 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Aug 13 20:27:14 jacksbox1 kernel: NET: Registered protocol family 8
Aug 13 20:27:14 jacksbox1 kernel: NET: Registered protocol family 20
Aug 13 20:27:14 jacksbox1 kernel: ACPI: RTC can wake from S4
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:01: ioport range 0x4000-0x407f has been reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:01: ioport range 0x4400-0x447f has been reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:01: ioport range 0x4480-0x44ff has been reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:01: ioport range 0x4800-0x487f has been reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:01: ioport range 0x2000-0x207f has been reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:01: iomem range 0x38000000-0x3fffffff could not be reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:0a: iomem range 0xf0000-0xf3fff could not be reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:0a: iomem range 0xf4000-0xf7fff could not be reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
Aug 13 20:27:14 jacksbox1 kernel: pnp: 00:0a: iomem range 0xfc000-0xfffff could not be reserved
Aug 13 20:27:14 jacksbox1 kernel: Time: hpet clocksource has been installed.
Aug 13 20:27:14 jacksbox1 kernel: Switched to high resolution mode on CPU 0
Aug 13 20:27:14 jacksbox1 kernel: Switched to high resolution mode on CPU 1
Aug 13 20:27:14 jacksbox1 kernel: PCI: Bridge: 0000:00:04.0
Aug 13 20:27:14 jacksbox1 kernel: IO window: b000-bfff
Aug 13 20:27:14 jacksbox1 kernel: MEM window: fdd00000-fddfffff
Aug 13 20:27:14 jacksbox1 kernel: PREFETCH window: fdc00000-fdcfffff
Aug 13 20:27:14 jacksbox1 kernel: PCI: Bridge: 0000:00:10.0
Aug 13 20:27:14 jacksbox1 kernel: IO window: c000-cfff
Aug 13 20:27:14 jacksbox1 kernel: MEM window: fdb00000-fdbfffff
Aug 13 20:27:14 jacksbox1 kernel: PREFETCH window: fde00000-fdefffff
Aug 13 20:27:14 jacksbox1 kernel: NET: Registered protocol family 2
Aug 13 20:27:14 jacksbox1 kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 13 20:27:14 jacksbox1 kernel: TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Aug 13 20:27:14 jacksbox1 kernel: TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
Aug 13 20:27:14 jacksbox1 kernel: TCP: Hash tables configured (established 131072 bind 65536)
Aug 13 20:27:14 jacksbox1 kernel: TCP reno registered
Aug 13 20:27:14 jacksbox1 kernel: checking if image is initramfs... it is
Aug 13 20:27:14 jacksbox1 kernel: Freeing initrd memory: 6126k freed
Aug 13 20:27:14 jacksbox1 kernel: Machine check exception polling timer started.
Aug 13 20:27:14 jacksbox1 kernel: audit: initializing netlink socket (disabled)
Aug 13 20:27:14 jacksbox1 kernel: audit(1218659222.996:1): initialized
Aug 13 20:27:14 jacksbox1 kernel: Total HugeTLB memory allocated, 0
Aug 13 20:27:14 jacksbox1 kernel: VFS: Disk quotas dquot_6.5.1
Aug 13 20:27:14 jacksbox1 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 13 20:27:14 jacksbox1 kernel: io scheduler noop registered
Aug 13 20:27:14 jacksbox1 kernel: io scheduler anticipatory registered
Aug 13 20:27:14 jacksbox1 kernel: io scheduler deadline registered
Aug 13 20:27:14 jacksbox1 kernel: io scheduler cfq registered (default)
Aug 13 20:27:14 jacksbox1 kernel: assign_interrupt_mode Found MSI capability
Aug 13 20:27:14 jacksbox1 kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 3072k, total 131072k
Aug 13 20:27:14 jacksbox1 kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=1
Aug 13 20:27:14 jacksbox1 kernel: vesafb: protected mode interface info at c000:d240
Aug 13 20:27:14 jacksbox1 kernel: vesafb: pmi: set display start = c00cd276, set palette = c00cd2e0
Aug 13 20:27:14 jacksbox1 kernel: vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
Aug 13 20:27:14 jacksbox1 kernel: vesafb: scrolling: redraw
Aug 13 20:27:14 jacksbox1 kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Aug 13 20:27:14 jacksbox1 kernel: Console: switching to colour frame buffer device 128x48
Aug 13 20:27:14 jacksbox1 kernel: fb0: VESA VGA frame buffer device
Aug 13 20:27:14 jacksbox1 kernel: isapnp: Scanning for PnP cards...
Aug 13 20:27:14 jacksbox1 kernel: isapnp: No Plug & Play device found
Aug 13 20:27:14 jacksbox1 kernel: Real Time Clock Driver v1.12ac
Aug 13 20:27:14 jacksbox1 kernel: Linux agpgart interface v0.102 (c) Dave Jones
Aug 13 20:27:14 jacksbox1 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Aug 13 20:27:14 jacksbox1 kernel: RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Aug 13 20:27:14 jacksbox1 kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Aug 13 20:27:14 jacksbox1 kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
Aug 13 20:27:14 jacksbox1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 13 20:27:14 jacksbox1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 13 20:27:14 jacksbox1 kernel: mice: PS/2 mouse device common for all mice
Aug 13 20:27:14 jacksbox1 kernel: EISA: Probing bus 0 at eisa.0
Aug 13 20:27:14 jacksbox1 kernel: Cannot allocate resource for EISA slot 2
Aug 13 20:27:14 jacksbox1 kernel: Cannot allocate resource for EISA slot 4
Aug 13 20:27:14 jacksbox1 kernel: EISA: Detected 0 cards.
Aug 13 20:27:14 jacksbox1 kernel: TCP cubic registered
Aug 13 20:27:14 jacksbox1 kernel: NET: Registered protocol family 1
Aug 13 20:27:14 jacksbox1 kernel: Starting balanced_irq
Aug 13 20:27:14 jacksbox1 kernel: Using IPI No-Shortcut mode
Aug 13 20:27:14 jacksbox1 kernel: Freeing unused kernel memory: 356k freed
Aug 13 20:27:14 jacksbox1 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Aug 13 20:27:14 jacksbox1 kernel: ACPI: Fan [FAN] (on)
Aug 13 20:27:14 jacksbox1 kernel: ACPI: Thermal Zone [THRM] (40 C)
Aug 13 20:27:14 jacksbox1 kernel: usbcore: registered new interface driver usbfs
Aug 13 20:27:14 jacksbox1 kernel: usbcore: registered new interface driver hub
Aug 13 20:27:14 jacksbox1 kernel: usbcore: registered new device driver usb
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16
Aug 13 20:27:14 jacksbox1 kernel: ehci_hcd 0000:00:0b.1: EHCI Host Controller
Aug 13 20:27:14 jacksbox1 kernel: ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
Aug 13 20:27:14 jacksbox1 kernel: ehci_hcd 0000:00:0b.1: debug port 1
Aug 13 20:27:14 jacksbox1 kernel: ehci_hcd 0000:00:0b.1: irq 16, io mem 0xfe02e000
Aug 13 20:27:14 jacksbox1 kernel: ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 13 20:27:14 jacksbox1 kernel: usb usb1: configuration #1 chosen from 1 choice
Aug 13 20:27:14 jacksbox1 kernel: hub 1-0:1.0: USB hub found
Aug 13 20:27:14 jacksbox1 kernel: hub 1-0:1.0: 8 ports detected
Aug 13 20:27:14 jacksbox1 kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
Aug 13 20:27:14 jacksbox1 kernel: scsi0 : pata_amd
Aug 13 20:27:14 jacksbox1 kernel: scsi1 : pata_amd
Aug 13 20:27:14 jacksbox1 kernel: ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f400 irq 14
Aug 13 20:27:14 jacksbox1 kernel: ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f408 irq 15
Aug 13 20:27:14 jacksbox1 kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Aug 13 20:27:14 jacksbox1 kernel: usb 1-5: configuration #1 chosen from 1 choice
Aug 13 20:27:14 jacksbox1 kernel: ata1.00: ATAPI: ATAPI DVD A DH16AYH, YH13, max UDMA/66
Aug 13 20:27:14 jacksbox1 kernel: ata1.00: limited to UDMA/33 due to 40-wire cable
Aug 13 20:27:14 jacksbox1 kernel: ata1.00: configured for UDMA/33
Aug 13 20:27:14 jacksbox1 kernel: scsi 0:0:0:0: CD-ROM ATAPI DVD A DH16AYH YH13 PQ: 0 ANSI: 5
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 17
Aug 13 20:27:14 jacksbox1 kernel: scsi2 : sata_nv
Aug 13 20:27:14 jacksbox1 kernel: scsi3 : sata_nv
Aug 13 20:27:14 jacksbox1 kernel: ata3: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 17
Aug 13 20:27:14 jacksbox1 kernel: ata4: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 17
Aug 13 20:27:14 jacksbox1 kernel: usb 1-8: new high speed USB device using ehci_hcd and address 3
Aug 13 20:27:14 jacksbox1 kernel: usb 1-8: configuration #1 chosen from 1 choice
Aug 13 20:27:14 jacksbox1 kernel: usbcore: registered new interface driver libusual
Aug 13 20:27:14 jacksbox1 kernel: Initializing USB Mass Storage driver...
Aug 13 20:27:14 jacksbox1 kernel: scsi4 : SCSI emulation for USB Mass Storage devices
Aug 13 20:27:14 jacksbox1 kernel: usbcore: registered new interface driver usb-storage
Aug 13 20:27:14 jacksbox1 kernel: USB Mass Storage support registered.
Aug 13 20:27:14 jacksbox1 kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Aug 13 20:27:14 jacksbox1 kernel: ata3.00: ATA-7: WDC WD1600JS-60NCB1, 10.02E02, max UDMA/100
Aug 13 20:27:14 jacksbox1 kernel: ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32)
Aug 13 20:27:14 jacksbox1 kernel: ata3.00: configured for UDMA/100
Aug 13 20:27:14 jacksbox1 kernel: ata4: SATA link down (SStatus 0 SControl 310)
Aug 13 20:27:14 jacksbox1 kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-60N 10.0 PQ: 0 ANSI: 5
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 18
Aug 13 20:27:14 jacksbox1 kernel: ohci_hcd 0000:00:0b.0: OHCI Host Controller
Aug 13 20:27:14 jacksbox1 kernel: ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
Aug 13 20:27:14 jacksbox1 kernel: ohci_hcd 0000:00:0b.0: irq 18, io mem 0xfe02f000
Aug 13 20:27:14 jacksbox1 kernel: usb usb2: configuration #1 chosen from 1 choice
Aug 13 20:27:14 jacksbox1 kernel: hub 2-0:1.0: USB hub found
Aug 13 20:27:14 jacksbox1 kernel: hub 2-0:1.0: 8 ports detected
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 19
Aug 13 20:27:14 jacksbox1 kernel: firewire_ohci: Added fw-ohci device 0000:02:05.0, OHCI version 1.0
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 20
Aug 13 20:27:14 jacksbox1 kernel: forcedeth: using HIGHDMA
Aug 13 20:27:14 jacksbox1 kernel: sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 13 20:27:14 jacksbox1 kernel: Uniform CD-ROM driver Revision: 3.20
Aug 13 20:27:14 jacksbox1 kernel: sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Aug 13 20:27:14 jacksbox1 kernel: sd 2:0:0:0: [sda] Write Protect is off
Aug 13 20:27:14 jacksbox1 kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 20:27:14 jacksbox1 kernel: sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Aug 13 20:27:14 jacksbox1 kernel: sd 2:0:0:0: [sda] Write Protect is off
Aug 13 20:27:14 jacksbox1 kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 20:27:14 jacksbox1 kernel: sda: sda1 sda2 sda3 sda4 <<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
Aug 13 20:27:14 jacksbox1 kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0
Aug 13 20:27:14 jacksbox1 kernel: sda5 sda6 sda7 sda8 >
Aug 13 20:27:14 jacksbox1 kernel: sd 2:0:0:0: [sda] Attached SCSI disk
Aug 13 20:27:14 jacksbox1 kernel: firewire_core: created new fw device fw0 (0 config rom retries)
Aug 13 20:27:14 jacksbox1 kernel: eth0: forcedeth.c: subsystem: 0103c:2a38 bound to 0000:00:14.0
Aug 13 20:27:14 jacksbox1 kernel: ReiserFS: sda5: found reiserfs format "3.6" with standard journal
Aug 13 20:27:14 jacksbox1 kernel: ReiserFS: sda5: using ordered data mode
Aug 13 20:27:14 jacksbox1 kernel: ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 13 20:27:14 jacksbox1 kernel: ReiserFS: sda5: checking transaction log (sda5)
Aug 13 20:27:14 jacksbox1 kernel: ReiserFS: sda5: Using r5 hash to sort names
Aug 13 20:27:14 jacksbox1 kernel: udevd version 125 started
Aug 13 20:27:14 jacksbox1 kernel: scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
Aug 13 20:27:14 jacksbox1 kernel: sd 4:0:0:0: [sdb] Attached SCSI removable disk
Aug 13 20:27:14 jacksbox1 kernel: sd 4:0:0:0: Attached scsi generic sg2 type 0
Aug 13 20:27:14 jacksbox1 kernel: scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
Aug 13 20:27:14 jacksbox1 kernel: sd 4:0:0:1: [sdc] Attached SCSI removable disk
Aug 13 20:27:14 jacksbox1 kernel: sd 4:0:0:1: Attached scsi generic sg3 type 0
Aug 13 20:27:14 jacksbox1 kernel: scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
Aug 13 20:27:14 jacksbox1 kernel: sd 4:0:0:2: [sdd] Attached SCSI removable disk
Aug 13 20:27:14 jacksbox1 kernel: sd 4:0:0:2: Attached scsi generic sg4 type 0
Aug 13 20:27:14 jacksbox1 kernel: scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
Aug 13 20:27:14 jacksbox1 kernel: sd 4:0:0:3: [sde] Attached SCSI removable disk
Aug 13 20:27:14 jacksbox1 kernel: sd 4:0:0:3: Attached scsi generic sg5 type 0
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 16
Aug 13 20:27:14 jacksbox1 kernel: hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
Aug 13 20:27:14 jacksbox1 kernel: ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 19
Aug 13 20:27:14 jacksbox1 kernel: PCI: Unable to reserve mem region #2:10000000@e0000000 for device 0000:00:05.0
Aug 13 20:27:14 jacksbox1 kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Aug 13 20:27:14 jacksbox1 kernel: rtc_cmos: probe of 00:05 failed with error -16
Aug 13 20:27:14 jacksbox1 kernel: i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
Aug 13 20:27:14 jacksbox1 kernel: i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Aug 13 20:27:14 jacksbox1 kernel: usbcore: registered new interface driver rt73usb
Aug 13 20:27:14 jacksbox1 kernel: Capability LSM initialized
Aug 13 20:27:14 jacksbox1 kernel: lp: driver loaded but no devices found
Aug 13 20:27:14 jacksbox1 kernel: fuse init (API version 7.
Aug 13 20:27:15 jacksbox1 kernel: NET: Registered protocol family 17
Aug 13 20:30:32 jacksbox1 kernel: usb 2-1: new low speed USB device using ohci_hcd and address 2
Aug 13 20:30:32 jacksbox1 kernel: usb 2-1: configuration #1 chosen from 1 choice
Aug 13 20:30:33 jacksbox1 kernel: usbcore: registered new interface driver hiddev
Aug 13 20:30:33 jacksbox1 kernel: input: Logitech USB Receiver as /class/input/input1
Aug 13 20:30:33 jacksbox1 kernel: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-1
Aug 13 20:30:33 jacksbox1 kernel: usbcore: registered new interface driver usbhid
Aug 13 20:30:33 jacksbox1 kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 13 20:30:33 jacksbox1 kernel: usbcore: registered new interface driver usbmouse
Aug 13 20:30:33 jacksbox1 kernel: drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Aug 13 20:30:40 jacksbox1 kernel: usb 2-2: new full speed USB device using ohci_hcd and address 3
Aug 13 20:30:41 jacksbox1 kernel: usb 2-2: configuration #1 chosen from 1 choice
Aug 13 20:30:55 jacksbox1 kernel: usb 2-4: new full speed USB device using ohci_hcd and address 4
Aug 13 20:30:56 jacksbox1 kernel: usb 2-4: configuration #1 chosen from 1 choice
Aug 13 20:30:56 jacksbox1 kernel: scsi5 : SCSI emulation for USB Mass Storage devices
Aug 13 20:30:56 jacksbox1 kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0xB202
Aug 13 20:30:56 jacksbox1 kernel: usbcore: registered new interface driver usblp
Aug 13 20:30:56 jacksbox1 kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Aug 13 20:31:01 jacksbox1 kernel: scsi 5:0:0:0: Direct-Access HP photosmart 7600 1.00 PQ: 0 ANSI: 2
Aug 13 20:31:01 jacksbox1 kernel: sd 5:0:0:0: [sdf] Attached SCSI removable disk
Aug 13 20:31:01 jacksbox1 kernel: sd 5:0:0:0: Attached scsi generic sg6 type 0
Aug 13 20:31:05 jacksbox1 kernel: usb 2-3: new full speed USB device using ohci_hcd and address 5
Aug 13 20:31:06 jacksbox1 kernel: usb 2-3: configuration #1 chosen from 1 choice
Aug 13 20:31:06 jacksbox1 kernel: Bluetooth: Core ver 2.11
Aug 13 20:31:06 jacksbox1 kernel: NET: Registered protocol family 31
Aug 13 20:31:06 jacksbox1 kernel: Bluetooth: HCI device and connection manager initialized
Aug 13 20:31:06 jacksbox1 kernel: Bluetooth: HCI socket layer initialized
Aug 13 20:31:06 jacksbox1 kernel: Bluetooth: HCI USB driver ver 2.9
Aug 13 20:31:06 jacksbox1 kernel: usbcore: registered new interface driver hci_usb
has anybody a suggestion about this problem? |
|
|
| |
|
|
|
 |
|
|
|
Post subject: RE: System hangs on booting all available kernels.
Posted: Aug 15, 2008 - 11:32 AM
|
|
Joined: Jan 12, 2007
Posts: 73
Status: Offline
|
|
I can't seem to fix my system, so I'm afraid I have to do a reinstall (first in years) .
Is there a way to find out exactly what packages I have installed on my current setup, so that I can install the same packages after a reinstall? |
|
|
| |
|
|
|
|
|
|
|
Post subject: RE: System hangs on booting all available kernels.
Posted: Aug 15, 2008 - 12:19 PM
|
|
Joined: Aug 24, 2007
Posts: 472
Location: Ljubljana
Status: Offline
|
|
dpkg -l
there was thread for better command (using same dpkg -l with filter to exclude libraries) and the command to reinstalling the packages from that data. |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Aug 15, 2008 - 04:16 PM
|
|
Joined: May 27, 2007
Posts: 87
Location: Germany
Status: Offline
|
|
If you have access to you system you could do following
Code:
dpkg --get-selections > old_packages.txt
Save the file at some safe place. Then in the newly installed system you can restore all the packages with
Code:
cat old_packages.txt | dpkg --set-selections
But as far as I know, this will not be useful if you cannot boot your system at all.
regards,
Hardik |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Aug 15, 2008 - 04:58 PM
|
|
Joined: Jan 12, 2007
Posts: 73
Status: Offline
|
|
thanks rangalo and muchan for the tip,
I'll give it a try but I'm afraid it won't go because there is almost loaded when I'll get the login prompt. |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Aug 15, 2008 - 05:45 PM
|
|
Joined: Jan 12, 2007
Posts: 73
Status: Offline
|
|
I think the problems are in /etc/rcS.d and /etc/init.d
I have laptop with same sidux install as on desktop, how can I make a copy of my laptops /etc/rcS.d dir?
This dir is full off shell scripts and symlinks , but when I try to copy them to a usb-stick I get errors about permissions,
How do I copy content of /etc/rcS.d to usb-stick and keep the right connections in the symlinks? |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Aug 15, 2008 - 09:22 PM
|
|
Joined: Aug 24, 2007
Posts: 472
Location: Ljubljana
Status: Offline
|
|
if you are root, probably there will not be permission problem. But it doesn't sound good to copy the content of
/etc/init.d to other computer... probably you should check each file side by side. and see where is problem.
If the disk has problem on that directory, copying these files won't fix the problem. And if you touched sidux's
pertition from windows file manager (? have you tried to open the drive? did it want to format to NTFS? ??)
it may not be recovered this way... |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Aug 15, 2008 - 09:44 PM
|
|
Joined: Jan 12, 2007
Posts: 73
Status: Offline
|
|
I didn,t change anything, I did a dist-upgrade with smxi and there were no errors.
I can boot my winXP partition and that works fine, so no hardware problem I think. |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Aug 15, 2008 - 11:30 PM
|
|
Joined: Aug 24, 2007
Posts: 472
Location: Ljubljana
Status: Offline
|
|
But as you described. dist-upgrade went OK, and you had working sidux.
Then you booted Windows, and next sidux boot failed.
So my deduction is that during Windows was on, sidux's file system was damaged.
(sure, other possibility was that d-u on smxi didn't show error, but it damaged /etc/init.d
and you didn't notice it untill you rebooted sidux after Windows. but from my/our experience,
I don't believe smxi or apt-get dist-upgrade caused this problem...)
One possible horror story, is that you have installed sidux on partition that WIndows uses as swap.
if you have booted Windows for the first time after sidux installation... 8( |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Aug 16, 2008 - 01:44 PM
|
|
Joined: Jan 12, 2007
Posts: 73
Status: Offline
|
|
the same windows and sidux install have been on this machine for more than a year whitout a problems, so I realy don't know what this problem could have cost.
ps ihave some older backups of my sidux install on my local server that were made with sbackup (simple backup config) , but I can't find out how to do a restore when I cannot boot into my sidux-install anymore, has anybody an Idea how to restore with sbackup? |
|
|
| |
|
|
|
|
|
|
|
Post subject:
Posted: Aug 17, 2008 - 09:00 AM
|
|
Joined: Jan 12, 2007
Posts: 73
Status: Offline
|
|
I was looking at release notes of sidux 2008-2 and saw mentioning of,
dash , kbd , and cpufrequtils.
These were also mentioned in my error messages at boot.
But anyway, I think I do a reinstall. |
|
|
| |
|
|
|
|
|
|
|
